Can be used with any WiLife Pro video security system. Connect up to six cameras per PC using Ethernet cables and 6-port or single- port WiLife Pro Power Injector. Cameras are automatically discovered by the WiLife Command Center software, without complex configuration and setup. May be used also with HomePlug Bridge. WiLife Pro Cameras connect to your LAN through the WiLife Power Injector using standard Ethernet cable. On the Ethernet line, the camera both communicates and receives its power, making it easy to set up. Driving the camera is a 400Mhz processor, powering incredible features: - DHCP and fixed IP addressing - Automatic discovery using UPnP - User-definable motion detection - WiLife powered ethernet - Intelligent image management - Field upgradable -- SPECIFICATION s ----------------------------------- CAMERA - Processing Power : 400 MHz DSP Onboard Image Encoding : Windows Media Video 9 Resolution : Selectable: 640 x 480 or 320 x 240 pixels. Frame Rate : Selectable: 15, 10 or 5 frames/ second. Illumination : 2 lux minimum per IEC 61146-1 Color Depth : 10-bits CABLE LENGTH - up to 300 feet (100 meters) REQUIREMENTS - The WiLife Pro System is an IP networked system that requires a good understanding of networking devices, configuration, and addressing. Intel Pentium 4 CPU 3.2GHz. Dual-core Intel and AMD processors deliver similar performance at lower clock speeds. 1GB RAM (1024 MB) 256MB Video Card 1024 x 768 or higher, 32 bit color Display Resolution 150 MB free hard drive space for program and a minimum of 10 GB for video storage. Microsoft Windows XP or Microsoft Vista Microsoft Windows Media Player version 9 or later ENVIRONMENTAL- Temperature Range : Operating +32 to +93 degrees F POWER SOURCE - 110/120 Volts AC, 50/60 Hz Consumption: 15 Watts DIMENSIONS - Camera Body: 4.72"w x 2.0"h x 8.0"d Camera WT. : 1.1 lbs. |